(Optional) Boots the access server from Flash memory with the optional filename of the image you want loaded. If omitted, this value defaults to the IP broadcast address of 255.255.255.255. (Optional) IP address of the network server on which the system image resides. Name of the system image from which you want to netboot. To boot the access server manually, use the b ROM monitor command. The following example specifies the IP address of a time server: The following example specifies a negative time offset of the local subnetwork of -3600 seconds:
The following example specifies a subnet mask of 255.255.0.0:
#Oem rcmd mac#
A BOOTP request from the host named mac results in a reply listing the boot filename as macboot.Īsync-bootp bootfile :172.30.1.1 "pcboot" With this configuration, a BOOTP request from the host on 172.30.1.1 results in a reply listing the boot filename as pcboot.
#Oem rcmd how to#
The following example illustrates how to specify different boot files: one for a PC, and one for a Macintosh. Use the noĪsync-bootp command to clear the list. Use the EXEC command show async bootp to list the configured parameters.
#Oem rcmd software#
If no extended BOOTP commands are entered, the access server software generates a gateway and subnet mask appropriate for the local network. The name of the client, which might or might not be domain qualified, depending upon the site.Ī two-octet value specifying the number of 512-octet (byte) blocks in the default boot file. A preferred gateway should be listed first.ĭotted-decimal address specifying the IP address of time servers (as defined by RFC 868).ĭotted-decimal address specifying the IP address of name servers (as defined by IEN 116).ĭotted-decimal address specifying the IP address of the Domain Name Server (DNS) (as defined by RFC 1034).ĭotted-decimal address specifying the IP address of an MIT-LCS UDP log server.ĭotted-decimal address specifying the IP address of Quote of the Day servers (as defined in RFC 865).ĭotted-decimal address specifying the IP address of Berkeley UNIX Version 4 BSD servers.ĭotted-decimal address specifying the IP address of Impress network image servers.ĭotted-decimal address specifying the IP address of Resource Location Protocol (RLP) servers (as defined in RFC 887). Signed 32-bit integer specifying the time offset of the local subnetwork in seconds from Universal Coordinated Time (UTC).ĭotted-decimal address specifying the IP addresses of gateways for this subnetwork. Use the optional :hostname and data arguments to specify the filename.ĭotted-decimal address specifying the network and local subnetwork mask (as defined by RFC 950).
#Oem rcmd download#
Specifies use of a server boot file from which to download the boot program.
Table 3-2: Async-BOOTP Tag Keywords Keyword List of IP addresses entered in dotted-decimal notation or as logical host names, a number, or a quoted string. The argument :hostname accepts both an IP address and a logical host name. (Optional) This entry applies only to the host specified. Item being requested expressed as filename, integer, or IP dotted-decimal address. Use the no form of this command to restore the default. Use the async-bootp command to enable support for extended BOOTP requests as defined in RFC 1084 when the access server is configured for SLIP. Table 3-1: Mapping Old Commands to New Commands Old CommandĬopy rcp running-config (for an rcp server)Ĭopy tftp running-config (for a TFTP server)Ĭopy rcp startup-config (for an rcp server)Ĭopy tftp startup-config (for a TFTP server)Ĭopy running-config rcp (for an rcp server)Ĭopy running-config tftp (for a TFTP server)įor access server configuration information and examples, refer to the "Loading System Images, Microcode Images, and Configuration Files" chapter in the Access and Communication Servers Configuration Guide. Support for these commands will cease in a future release. Note Commands in this chapter that have been replaced by new commands continue to perform their normal functions in the current release but are not longer documented. Configuration files contain commands entered to customize the functions of the access server.įor access server configuration information and examples, refer to the "Loading System Images and Configuration Files" chapter in the Access and Communication Servers Configuration Guide. System images contain the system software. This chapter provides detailed descriptions of the commands used to load and copy system images and configuration files. System Image and Configuration File Load Commands
0 kommentar(er)
